9
controlpanel
installation instructions
For your security and to ensure correct operation of the machine,
please install and adjust the machine according to these instructions.
installingthe lintfilter
Place the bottom side of the lint filter into the overflow filter, then
push the top side into the overflow filter.
After installation, double check to make sure that the lint filter is in-
stalled in the correct location; otherwise it may fall off during op-
eratio n.
set up the drain hose on models (LMD6124PBEB0 ,
LMD6124PBCS0, LMD8124PBCS0)
The drain hose when laid down on the floor, should not be higher
than 10 cm, otherwise the drainage will not flow at the proper rate
causing an incomplete process.
wash program
PROGRAM
soft
To Next Page
Loading...
Need help?
General
