5
• Insert the power cord into a rated voltage outlet. Be sure to use a
single-phase three pin outlet.
• The terminal of the outlet must be grounded.
• Insert the power plug in a location where it can be easily inserted
and extracted by hand.
• Be sure to remove the plug from the power supply if power failure
occurs, when moving or cleaning the machine, or when the ma-
chine is idle.
• If the power cord is damaged, it must be replaced by the manufac-
turer, its authorized service agent or qualified personnel in order
to avoid a hazard.
• Do not wash the machine with water. Do not place wet clothes on
the control panel.
If the washing machine is installed on a carpet, make sure to keep
the ventilation hole clear of obstruction.
Ventilation hole
at the bottom of
the washing
machine.
• Do not share the outlet with other electric appliances. If the power
plug is damaged, or feels loose when plugged into the outlet, stop
using the plug immediately. Rated current of fuse: 10 A.
To Next Page
Loading...
Need help?
General
