EasyManua.ls Logo

mabe MMI09CDBWCCCHI8 - troubleshooting tips

mabe MMI09CDBWCCCHI8
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
97
troubleshooting tips
The following cases may not always are a malfunction, please check
this section before contacting the service center.
Problem Possible Causes
Air conditioner won't start
immediately.
You must wait at least 3 minutes
before changing modes during
operation or after turning off the
air conditioner.
Appliance
won't start
Ineffective control. Strong interference coming from
an excessive static electricity dis-
charge, power supply voltage ab-
normality. Operation of the appli-
ance will be abnormal. At this
time, disconnect from power sup-
ply and reconnect 2-3 seconds
later.
No cooling or heating (on
some models only).
The air filter is dirty.
Air conditioner inlet and outlet
vents are blocked.
Temperature is improperly set.
The air conditioner
won't run.
The protector tripped or fuse is
blown. Wait 3 minutes before re-
starting the unit, protective device
may be preventing unit to work.
Remote control batteries are ex-
hausted.
Power plug is not properly in-
serted into outlet.

Related product manuals