What to do if MAC3 HydroController HCW-MM displays 'Tensione bassa.. Low Voltage'?
If your MAC3 Controller displays 'Tensione bassa.. Low Voltage', examine the electrical system and restore the values to the range prescribed for HC.
What to do if my MAC3 HydroController HCW-MM displays 'Protezione Pompa Pump Protection'?
If your MAC3 Controller shows 'Protezione Pompa Pump Protection', check the correct functioning of the flow valve and inspect the system for any leaks.
General| Brand | MAC3 |
|---|---|
| Model | HydroController HCW-MM |
| Category | Controller |
| Language | English |
Crucial safety warnings, dangers, electrical shock risks, and installation precautions.
Information on choosing pumps, adapters, filters, and the Multipress system.
Covers package contents, hydraulic, electrical, and software installation.
Step-by-step configuration for single-pump HC Standard models.
Configuration for HC Advanced multipump systems, including Master/Slave.
General remarks, product description, usage conditions, and technical specifications.
Details device protections like over/under voltage, short circuit, and pump protection.
Covers electrical connections for different pump types and specific model features.
Standard HC features like pressure sensor input, ON/OFF, and relay configurations.
Advanced HC features with expansion boards for alarms, multipump, etc.
Instructions and warnings for hydraulic installation, expansion tanks, and filters.
Guide to maintenance menu, troubleshooting common issues, and error messages.
Detailed explanation of all parameters available in the extended menu.
Declaration of conformity with standards and instructions for product disposal.
To Next Page
