To Next Page
X
xclarkAug 4, 2025
What to do if MAC3 HydroController HCW Controller sistema off?
- AAmanda SanfordAug 4, 2025
If the MAC3 Controller's system is off, repeat the startup procedure, and ensure that the 'Start' setting is turned ON.
What to do if MAC3 HydroController HCW Controller sistema off?
If the MAC3 Controller's system is off, repeat the startup procedure, and ensure that the 'Start' setting is turned ON.
General| Brand | MAC3 |
|---|---|
| Model | HydroController HCW |
| Category | Controller |
| Language | English |
Covers reading manual, qualified personnel, and installation requirements.
Guidance on selecting pumps compatible with the inverter for optimal performance.
Explanation of the ACL filter for reducing overvoltages on long cables.
Information on EMC filters for sensitive environments to eliminate interference.
Description of the Multipress unit for pressure control in irrigation systems.
Lists the items included with the Hydrocontroller upon purchase.
Instructions for connecting the pump and system hydraulically.
Diagrams and instructions for electrical connections.
Overview of software installation procedures.
Step-by-step guide for installing the HC Standard single pump model.
Guide for installing the HC Advanced model for multi-pump systems.
Overview of HydroController capabilities, versions, and multipump setup.
Environmental and fluid requirements for safe operation.
Detailed technical data for various models.
Detailed technical data for MM Standard/Advanced models.
Detailed technical data for MT Standard/Advanced models.
Detailed technical data for TT Standard/Advanced models.
Explanation of device protections and automatic/manual reset procedures.
Wiring diagrams and instructions for connecting pumps and power supply.
Details for MM, MT, TT (6A-11A) models, including sensors and inputs.
Features of the expansion board for MM, MT, TT (6A-11A) advanced models.
Features for HC Advanced TT (15A-25A) single board models.
Setup for master-slave communication in multi-pump systems.
Guidelines for installing the unit and connecting the hydraulic system.
Provides access to system parameters for configuration and monitoring.
Identifies common fault messages and provides solutions and actions.
Allows visualization and modification of all system parameters.
