Istruzioni-HCMMMTTT-09022023 (Cod.620100007 Rev.16) EsEng (USA) MAC3.doc
32
6.4 HC Advanced TT (15A/18A/25A)
ES La versión para modelos HC 15A a 25A consta de una
sola tarjeta electrónica con:
• Dos relés configurables (para anomalías eléctricas e
hidráulicas, bomba de funcionamiento, booster)
• Entrada ON/OFF para encender o apagar la bomba
mediante un comando externo (ej, interruptor de flotador
de funcionamiento en seco u otro contacto limpio). El
cierre del contacto permite activar el inversor
• entrada sensor tèrmico motor
• control areas de riego (con dispositivo MULTIPRESS u
otro dispositivo compatible)
• Conexión con otros hidrocontroladores (modo
Multibombas)
EN The version for HC 15A to 25A models consist of a single
electronic board with:
• Two configurable relay (for electrical and hydraulic
anomalies, running pump, booster)
• ON / OFF input to switch the pump on or off using an
external command (eg dry running floatswitch or other
clean contact). Closing the contact allows the inverter to
be activated
• Input for motor thermal
• Irrigation zones control (by device MULTIPRESS or other
compatible device)
• Connection with other Hydrocontrollers (multipump
mode)
EN The version for models HC 7.5hp to 15hp is supplied
with integrated expansion board for:
• Two configurable relay (alarm, running pump,
booster)
• Remote input to turn ON or OFF the pump with
floatswitch
• Input for motor thermal
• Irrigation zones control (by device MULTIPRESS)
• Connection with other Hydrocontrollers (multipump
mode)
To Next Page
Loading...
Need help?
General
