MAC3 HydroController HCW MT 1P - Page 48

User guide HC - Copyright © 2008 MAC3. All right reserved.
Man 01
Disegno 6328
7
Via Baldanzese, 149 50041 Calenzano FI
Tel. 055 8877672 – Fax 8877068
www.mac3.it - e-mail: mac3@mac3.it
En
glish
Garden Mode ON
 Displayed Sector1 pressure
e. Press + or – to change the value (from 1.00 to 7.50)
f. insert the value for irrigation sectors at the first pressure set point.
g. Press ENTER, and keep pressed till it will be displayed “Done.…………”.
 Displayed Sector2 pressure
a. Press + or – to change the value (from 1.00 to 7.50)
b. insert the value for irrigation sectors at the first pressure set point.
c. Press ENTER, and keep pressed till it will be displayed “Done.…………”.
 Displayed Sector3 pressure
a. Press + or – to change the value (from 1.00 to 7.50)
b. insert the value for irrigation sectors at the first pressure set point.
c. Press ENTER, and keep pressed till it will be displayed “Done.…………”.
Sector3 Pressure
2
,50 Bar
Se
c
tor
2 Pressure
2
,
0
0 Bar
Se
c
tor1
Pressure
1,50 Bar