SAFETY
MD #184372
General hazard pertaining to machine operation
and servicing
CAUTION
To avoid injury or death from improper or unsafe
machine operation:
• Read the operator’s manual and follow all safety
instructions. If you do not have a manual, obtain one
from your Dealer.
• Do not allow untrained persons to operate the machine.
• Review safety instructions with all Operators annually.
• Ensure that all safety signs are installed and legible.
• Mak e certain everyone is clea r of m achine before
starting engine and during operation.
• Keep riders off the machine.
• Keep all shields in place and stay clear o f moving parts.
• Disengage header drive, put transmission in Neutral,
and wait for all movement to stop before leaving
operator’s position.
• Shut off the engine and remove the k ey from ignition
before servicing, adjusting, lubricating, cleaning, or
unplugging machine.
• Engage safety props to prevent lowering of raised unit
before servicing in t he ra ised po sition .
• Use slow moving vehicle emblem and flas hing wa rnin g
lights when operating on roadways unless prohibited
by law.
Figure 1.18: MD #184372
MD #184422
Keep shie lds
in place hazard
WARNING
• Do not place
foot.
• To avoid inj
ury, stop the engine and remove the key
before open
ing power driv e system shie ld .
•Keepallshi
elds in place.
Figure 1.19: MD #184422
169000_SUPPLEMENT_2
8 Revision D
To Next Page
Loading...
