Need help?Do you have a question about the MacDon 912 and is the answer not in the manual?
General| Brand | MacDon |
|---|---|
| Model | 912 |
| Category | Farm Equipment |
| Language | English |
Symbol indicating important safety messages and on safety signs.
Use of DANGER, WARNING, CAUTION for safety messages.
Reproduction of safety signs on header and installation instructions.
General safety precautions for all machinery operation.
Details on available sizes, cut widths, speeds, and weights.
Details on type, roll width, diameter, speed, and weight.
Correct torque values for various bolts and capscrews.
Duties of the owner and operator for safe and proper machine use.
Step-by-step instructions for connecting the hay conditioner.
Step-by-step instructions for removing the hay conditioner.
Initial operational checks and procedures for new machines.
Procedures to follow before starting operation each season or day.
Main controls and safety stops for header height adjustment.
Adjustments for lean bar, ground speed, reel speed, pitch, cutting height, angle, and flotation.
Adjustments for auger deflectors, roll intermesh, roll tension, feed pan, and forming shields.
Factors affecting hay curing time and quality.
Unplugging, roll opener, transporting, lifting, and storage.
Safety precautions and general guidelines before servicing the machine.
Types of grease, gear lube, and required capacities.
Daily, 25-hour, 50-hour, and 100-hour greasing points.
Lubrication, section replacement, removal, guards, hold-downs, timing, and speed adjustments.
Reel position, finger replacement, speed, belt, and chain tension.
Auger position, speed, and drive belt/chain tension adjustments.
Roll timing, drive belt tension, and gear case lubricant.
Periodic maintenance intervals and a log for service history.
Table of symptoms, problems, solutions, and reference pages.
Kit for crop dividers and lean bar extensions for tall crops.
Optional components for adjusting cutting height and following ground contours.
Bat assemblies for reel repair and replacement.
Guards for effective cutting in tough grass crops.
System for side delivery of conditioned crops to a chopper.
Optional kit to open conditioner rolls for clearing plugs.
Instructions for safely unloading the header from transport.
Installing skid shoes, removing pans, and setting support stands.
Step-by-step instructions for connecting the hay conditioner.
Installing breather, side deflectors, fins, and forming shields.
Installing auger pan extensions and forming rods for grass seed headers.
Installation instructions for the optional hydraulic roll opener kit.
To Next Page
