Form # 46620 Issue 11/06
19
OPERATION
PRE-STARTING CHECKS
Do the following at the start of each operating
season.
CAUTION:
1. Review the Operator’s Manual to refresh
your memory on safety and operating
recommendations.
2. Review all safety signs and other decals on
the machine and note hazard areas.
3. Be sure all shields and guards are properly
installed and secured. Never alter or
remove safety equipment.
4. Reaquaint yourself with the controls before
beginning operation.
Also:
5. Adjust tension on all belts and chains. See
Maintenance/Service section.
6. Perform all annual maintenance. See
Maintenance/Service section.
To Next Page
Loading...
