Mach M-Flex 12 - Mounting the Speakers; Flying Options; Tripod Mounting

Mounting the speakers 11
M OUNTING THE SPEAKERS 3
FLYING OPTIONS
The M•Flex models can be flown in three different ways:
• Use the custom designed U brackets. Typically used for flying horizontally in low
ceiling applications or on truss.
• Insert M6 eye bolts in the four flying points. Typically used when flying vertically.
• Insert the custom designed flying bracket in the four flying points. Typically used
for flying M•Flex in horizontal or vertical clusters
Caution: Rigging should only be performed by professionals following
safe rigging standards and methods.
TRIPOD MOUNTING
Apart from the versatile flying options, the M•Flex 12 and M•Flex 15 also feature
an integrated 35mm aluminium top-hat adaptor, which enables the box to be placed
on a tripod. When using a tripod, note the following:
• Make sure that the tripod is capable of supporting the weight of the speaker (refer to
specifications in the back of this manual)
• Check that the tripod is placed on a stable surface
• Remember that tripod legs are trip hazards. Place them away from the audience or
place additional weight on the base of the stand to improve stability.