Need help?Do you have a question about the Mackie DRM315 and is the answer not in the manual?
General| Woofer | Yes |
|---|---|
| Magnet type | Ferrite |
| Speaker type | 3-way |
| Number of drivers | 3 |
| Speaker placement | Floor, Stand-mountable |
| Audio output channels | 2.0 channels |
| Number of woofer drivers | 1 |
| Woofer diameter (imperial) | 15 \ |
| Mid-range driver diameter (imperial) | 6.5 \ |
| Impedance | 8 Ω |
| Sensitivity | 137 dB |
| Frequency range | 35 - 20000 Hz |
| RMS rated power | 1920 W |
| Crossover frequency | 2500 Hz |
| Peak Music Power Output (PMPO) | 2300 W |
| Product color | Black |
| Housing material | Plywood |
| Recommended usage | Speaker set unit |
| Amplifier class | D |
| Bluetooth | No |
| Connectivity technology | Wired |
| AC input voltage | 220 - 240 V |
| Power source type | AC |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 110 W |
| Operating temperature (T-T) | 0 - 40 °C |
| Package type | Box |
| Package depth | 566 mm |
| Package width | 564 mm |
| Package height | 996 mm |
| Package weight | 36800 g |
Weight and Dimensions| Depth | 478 mm |
|---|---|
| Width | 483 mm |
| Height | 927 mm |
| Weight | 30800 g |
Step-by-step instructions for initial setup and connections.
Details on connecting the loudspeaker to the AC power outlet.
Instructions for operating the power switch and power-on/off sequence.
Description of input channels 1 and 2, including XLR and 1/4" connections.
Information on connecting stereo 1/8" line-level signals to channels 3/4.
Overview of the high-resolution TFT LCD display and its information.
How to use the rotary encoder for navigation and control.
Describes the default screen showing I/O, voicing, EQ, and delay settings.
How to choose speaker voicing modes like Live, Club, Speech, and Monitor.
Adjusting the 3-band EQ with shelving low, peaking mid, and shelving high.
Setting speaker delay for time-alignment and optimizing sound.
Saving and recalling user presets for various settings and applications.
Setting a 4-digit passcode to lock and unlock the interface.
Resetting all parameters to factory defaults, with or without saving presets.
Steps to diagnose and resolve common issues like no power, no sound, or poor sound.
To Next Page
