Do you have a question about the Mackie DRM12A and is the answer not in the manual?
Woofer | Yes |
---|---|
Speaker type | - |
Driver diameter | 25 mm |
Woofer diameter | 305 mm |
Number of drivers | 3 |
Speaker placement | Stand-mountable |
Audio output channels | 1.0 channels |
Number of woofer drivers | 1 |
Driver diaphragm material | Titanium |
Woofer diameter (imperial) | 12 \ |
Bluetooth | No |
Connectivity technology | Wired |
Impedance | 600 Ω |
Frequency range | 50 - 20000 Hz |
RMS rated power | 2000 W |
Crossover frequency | 1000 Hz |
Signal-to-Noise Ratio (SNR) | 135 dB |
Current | 20 A |
AC input voltage | 250 V |
AC input frequency | 50 - 60 Hz |
Power consumption (typical) | 175 W |
Product color | Black |
Recommended usage | Stage |
Package depth | 536 mm |
Package width | 721 mm |
Package height | 480 mm |
Package weight | 28100 g |
Quantity per pack | 1 pc(s) |
Depth | 457 mm |
---|---|
Width | 627 mm |
Height | 386 mm |
Weight | 24900 g |
Balanced XLR connectors for audio signal input and daisy-chaining output.
High-resolution display for settings and a rotary encoder for navigation and control.
Configures voicing for 1, 2, or 3-4 loudspeakers per side in an array.
Covers limiting, overexcursion protection, and thermal shutdown to safeguard the loudspeaker.
Emphasizes professional installation, load limits, and safety precautions for flying loudspeakers.
Guides users through diagnosing and resolving problems like no power, noise, or poor sound.
Provides information on warranty service, locating service centers, and contacting technical support.