Mackie DRM12A - DRM12 A Dimensions

Owner’s Manual
29
Owner’s Manual
DRM2A Loudspeaker Dimensions
WEIGHT
55.0 lb
24.9 kg
24.7 in
627 mm
15.2 in
386 mm
18.0 in
457 mm
Construction Features
Basic Design: Horizontal Trapezoidal
Enclosure Material: 5mm plywood
Enclosure Finish: Black Polyurea
Grille Material: 6-8 gauge perforated steel
Grille Finish: Powder-coated black
Handles: One on each side
Display LEDs
Front: Power ON
Rear: Speaker Control
Operating Temperature: 0 – 40 ˚C
32 – 04 ˚F
Physical Properties
Height: 5.2 in / 386 mm
Width: 24.7 in / 627 mm
Depth: 8.0 in / 457 mm
Weight: 55.0 lb / 24.9 kg
Mounting Methods:
Floor mount, pole mount via the built-in socket on the bottom
of the cabinet [Be sure the pole is capable of supporting
the weight of the DRM2A loudspeaker] or fly via the integrated
M0 mounting points (using M0 x .5 x 20 mm forged shoulder
eyebolts).
See page 22, 24-26 for more information.
Options
DRM2A Cover P/N 2036809-52
FB00 Flybar Kit P/N 205004
SPM400 Loudspeaker Pole Mount P/N 205055
PA-A2 Forged Shoulder Eyebolt Kit
(3 x M0 x .5 x 20 mm) P/N 0028272
Disclaimer
Since we are always striving to make our products better
by incorporating new and improved materials, components,
and manufacturing methods, we reserve the right to change
these specifications at any time without notice.
The “Running Man” figure is a registered trademark of LOUD
Audio, LLC.
All other brand names mentioned are trademarks or registered
trademarks of their respective holders, and are hereby
acknowledged.
©209 LOUD Audio, LLC.
All Rights Reserved.
DRM2A Loudspeaker Specifications continued...