Macrom 42.24 - Technical Data

MACROM INGLESE 42.15 - 42.17 17 FEBBRAIO 199312
TECHNICAL DATA
42.24 STEREO Power Output
Maximum power ....................................................................... 60Wx2
Nominal RMS 4
Ohm, 20 Hz to 20 kHz at 0,05% THD ............ 45Wx2
Nominal RMS 2 Ohm, 20 Hz to 20 kHz at 0,05% THD ............ 75Wx2
BRIDGED Power Output
Maximum power, 4 Ohm, 1 kHz ............................................... 125W
42.26 STEREO Power Output
Maximum power ....................................................................... 80Wx2
Nominal RMS 4 Ohm, 20 Hz to 20 kHz at 0,05% THD ............ 65Wx2
Nominal RMS 2 Ohm, 20 Hz to 20 kHz at 0,05% THD ............ 80Wx2
BRIDGED Power Output
Maximum power, 4 Ohm, 1 kHz ............................................... 156W
Frequency response +0, -1dB .................................................. 10-50,000 Hz
S/N (signal to noise ratio) INFA-weighted ................................ 105 dB
Input sensitivity/Impedance
(for nominal power output)
Control in mid position ........................................................ 500 mV/10k Ohm
Variable control .................................................................. 100-2,000mV/10k Ohm
Speaker impedance .................................................................. 4 or 2 Ohm (stereo)
4 Ohm (bridged, mono)
Power supply (negative ground) 14.0V DC (11-16 V permissible)
Net Weight
42.24...................................................................................1.6
kg
42.26...................................................................................1.8 kg
Chassis size
42.24...................................................................................217(L)x50(H)x150(P) mm
42.26...................................................................................217(L)x50(H)x190(P) mm
Due to continuing improvement, the features and the design are subject to change without notice.
12