Macrom M2A.2000 User Manual

Owner’s Manual
M2A.2000
www.macrom.it

Macrom M2A.2000 Specifications

General

Channels	2
Frequency response	10 Hz - 30 kHz
Signal-to-noise ratio	> 90 dB
THD at 4 Ohms	< 0.05 %
Input sensitivity	0.2 - 6 V
Input impedance	47 kOhms
Damping factor	> 100
LPF	50 Hz - 250 Hz
Dimensions	220 x 53 x 250 mm
Type	Class AB
Bass Boost	0dB - 12dB

Summary

Front/Rear View

Features

Technical Data

Crossover Setting

Flat Setting

Select "FLAT" for a complete frequency range.

Low Pass Filter

Select "LOW" for a low frequency range.

High Pass Filter

Select "HIGH" for a high frequency range.

Band Pass Filter

Select "LOW and HIGH" for a band pass frequency range.

Speakers Connection

Power Connection

Input Setting

Low Level Input

Connect the audio output from the car radio to the low level input.

High Level Input

Connect speaker outputs from the car radio to the high level input.

Gain Control

Adjust the gain control according to the audio level output.