Need help?Do you have a question about the Macrom 44.50 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| THD at 4 Ohms | <0.05% |
| S/N ratio | >90 dB |
| RMS power at 4 Ohms | 4x50 W |
| RMS power at 2 Ohms | 4x75 W |
| Bridged RMS power at 4 Ohms | 2x150 W |
Important safety measures to prevent damage and ensure proper operation.
Highlights the main technical capabilities and functionalities of the amplifier.
Connects the head unit's pre-output leads to the amplifier's front section input.
Adjusts input sensitivity for optimal sound level without distortion.
Selects output mode by activating High-Pass or Low-Pass filters for front channels.
Allows continuous adjustment of High-Pass and Low-Pass frequencies between 30 and 600 Hz.
Selects amplifier input configuration for 4 or 2 channels.
Selects amplifier output configuration for 4, 3, or 2 channels.
Selects output mode by activating High-Pass or Low-Pass filters for rear channels.
Allows continuous adjustment of High-Pass and Low-Pass frequencies between 30 and 600 Hz.
Adjusts input sensitivity for optimal sound level without distortion for rear channels.
Connects the head unit's pre-output leads to the amplifier's rear section input.
Outputs for connecting speakers, specifying minimum impedance requirements.
Specifies fuse replacement guidelines to prevent unit damage.
Instructions for connecting the positive battery lead with an inline fuse.
Instructions for connecting the ground lead to the vehicle chassis.
Connects to the head unit for remote switching of the amplifier on/off.
Indicates unit status and details protection mechanisms like overheating and overloads.
To Next Page
