How to fix a Macrom Car Video System that cannot power on?
If your Macrom Car Video System won't power on, the unit fuse or the car battery fuse might be blown. Replace the blown fuse with a new fuse that has the correct rating. It is also possible that the unit experienced an illegal operation, in such case you should reset the unit.
Why is there no or low audio output from my Macrom Car Video System?
If you're experiencing no or low audio output from your Macrom Car Video System, here are a few things to check: 1. Make sure the audio output connections are properly wired. 2. Increase the volume level. 3. The speakers might be damaged and require replacement. 4. Adjust the channel balance to the center position if the volume balance is heavily biased. 5. Ensure the speaker wiring isn't in contact with any metal parts of the car; if it is, insulate the connections.
What to do if Macrom Car Video System has poor sound quality?
If you notice poor sound quality or distortion with your Macrom Car Video System, try these solutions: * If you are using a pirated disc, switch to an original disc. * If your speakers don't match the unit's power rating, replace them. * Ensure that all wirings are correctly connected. * Check that the speaker is not shorted and correct the wiring if needed.
Why does my Macrom M-DL5000 have a flashing image?
If you see a flashing image or interference on the screen of your Macrom Car Video System, it could be due to several reasons: * The color system of the DVD disc might not match the monitor. Adjust the color system of the DVD disc or the monitor. * You might be using a pirated disc. Try using an original disc. * The video cable could be damaged. Replace the cables. * There might be improper video signal connections. Check the wiring and correct it if necessary.
What to do if Macrom M-DL5000 resets when engine is off?
If your Macrom Car Video System resets itself when the engine is off, it might be due to an incorrect connection between the ACC and BATT. Check the wiring and correct it.
How to stop warning information constantly showing on Macrom Car Video System?
If warning information is constantly displayed on your Macrom Car Video System, the parking brake wiring might not be correct. Check the wiring and correct it.
General| Touchscreen | Yes |
|---|---|
| DVD Player | Yes |
| USB Port | Yes |
| SD Card Slot | Yes |
| Bluetooth | Yes |
| Radio Tuner | Yes |
| Video Playback | Yes |
| Audio Playback | Yes |
| Rear Camera Input | Yes |
| Resolution | 800 x 480 pixels |
Important safety warnings regarding fuse replacement to prevent damage or fire.
Guidelines for safe electrical connection, emphasizing 12V negative grounding.
Warnings against installing the unit where it impairs driving safety.
Prohibition of front video display use while driving, except for rear view cameras.
Avoid exposing the unit to moisture or water to prevent electrical hazards.
Symptoms requiring immediate contact with a dealer for diagnosis.
Advice to adjust volume to a safe level for emergency situations.
Connecting external amplifiers for enhanced audio performance.
Options for connecting external monitors for visual output.
Connecting portable players, USB devices, and Bluetooth phones.
Detailed identification and function of front panel buttons and ports.
Explanation of all buttons on the remote control's front view.
Guidelines for remote control usage, battery care, and installation.
How to engage the parking brake, mute audio, and turn the unit on/off.
Switching playback sources and understanding audible feedback.
Adjusting audio equalizer presets and custom parameters.
Balancing speaker output and adjusting subwoofer volume.
Procedures for setting the date, clock mode, and current time.
Understanding the tuner display and selecting radio as a source.
Choosing radio bands and tuning stations manually or automatically.
Storing favorite stations and filtering by signal strength.
Accessing equalizer settings and understanding RDS fundamentals.
Configuring RDS, CT, EON, TA, and PTY functions.
In-depth explanation of advanced Radio Data System features.
Using touch screen controls for playback and navigation.
Connecting, removing, and managing USB and SD/MMC devices.
Play, pause, skip tracks, and navigate chapters during playback.
Locating and selecting audio, video, and picture files.
Navigating and managing files within folders.
Setting repeat modes for single tracks or all tracks.
Playing audio tracks in a random sequence.
Displaying playback details, direct track selection, and picture manipulation.
Adjusting video display parameters like brightness and contrast.
Steps to pair and connect Bluetooth-enabled phones and devices.
Managing Bluetooth connections and handling phone calls.
Handling incoming calls and configuring Bluetooth settings.
Streaming audio and controlling music playback via Bluetooth.
Configuring general options and calibrating the touch screen.
Adjusting video playback options and parking brake detection.
Adjusting audio output and date/time preferences.
Selecting display language and managing Bluetooth connections.
Restoring default settings and adjusting source-specific volumes.
Connecting external devices and performing unit resets.
Guidance on fuse replacement and using the navigation system.
Customizing steering wheel controls for unit functions.
Technical details on power, radio, and display.
Specifications for audio/video output, AUX input, and operating environment.
Lists supported media file formats and their specifications.
Solutions for unit power and audio output problems.
Troubleshooting poor sound and unexpected unit resets.
Resolving TFT monitor warnings and screen interference.
Detailed pin assignments and wiring for unit connections.
To Next Page
