To Next Page

To Previous Page

- 17 -

You can make or receive phone calls with Bluetooth-enabled phones through the unit. You can also

listen to music from a Bluetooth-enabled device.

Bluetooth Mode

Pair the Bluetooth-enabled Devices

To connect your Bluetooth device to the unit, you need to

pair the device to the unit. Pairing needs only to be done

once. You can pair up to five devices.

1. Turn on the Bluetooth function on the device.

2. Touch [ ] to search for Bluetooth device with the unit.

3. Start scanning on the Bluetooth device and select the

unit “M-DL5000”

4. Enter default password “0000”.

Tip:

• TheoperationalrangebetweenthisunitandaBluetoothdeviceisapproximately5meters.

• BeforeyouconnectaBluetoothdevicetothisunit,familiarizeyourselfwiththeBluetooth

capabilities of the device.

• CompatibilitywithallBluetoothdeviceisnotguaranteed.

• AnyobstaclebetweenthisunitandaBluetoothdevicecanreducetheoperationalrange.

• Keepthisunitawayfromanyotherelectronicdevicethatmaycauseinterference.

Disconnect Bluetooth Device

To disconnect one device, touch [ ] .

Tip

• Thedevicewillalsobedisconnectedwhenthedeviceismovedbeyondtheoperationalrange.

• Ifyouwanttoreconnectthedevicetotheunit,placeitwithintheoperationalrange.

• Ifyoudonotwanttoreconnectthedevicetotheunitautomatically,touch[ ],

then set [ Auto connect ] to [ Off ]. For details, see the “Adjust Bluetooth Settings” section.

Make a Call

1. Select Bluetooth function in the home menu.

2. Pair the phone with the unit.

3. Search for phone number from the following list:

[Phone Book]

[Call Log]

[Missed calls]

[Received calls]

[Dialed calls]

Or touch the number pad directly, then touch [ ] to dial.

M-DL5000 User manual_ENG.indd 17 14/04/2015 17:23:48

Macrom M-DL5000 User Manual

Questions and Answers: