2. Operation Instruction
a. Screen Lock
1) Press for 3 seconds to lock or unlock the screen
2) Automatic Lock Period: 30 seconds if no operation
b. Power On
Press for 3 seconds to unlock screen, Press to power on machine.
c. Temperature Setting
Press and to display and adjust set temperature.
d. Mode Selection
Heating/Cooling/Auto
Press to switch between heating , cooling and auto mode ”
Heating mode : Water temperature setting range(18-40°C)
Cooling mode : Water temperature setting range(12~30°C)
Auto mode : Water temperature setting range(12~40°C)
* When water inlet temperature is higher than setting point, automatic cooling mode starts.
* When water inlet temperature is lower than setting point, automatic heating mode starts.
Silence/Boost mode selection
Press to switch among boost mode , silence mode
Default mode: boost
Please choose boost mode for initial heating
e. WIFI
When the screen is on, press for 3 seconds, after flashing, enter Wi-Fi connection.
Connect Wi-Fi on mobile phone and input password, and then control equipment by Wi-Fi. When
APP connects Wi-Fi successfully， lights on
PLEASE SEE WiFi OPERATION GUIDE FOR FURTHER INFORMATION
To Next Page
Loading...
