Madimack Elite Max - Product Warranty Registration

Product Warranty Registration
Please complete all the details below from the installer and store this
card along with the purchase docket in a safe place.
Please take 2 or 3 photos of the installation and with this information
upload them online at
https://www.madimack.com.au/warranty-registration
or use the barcode scanner to go direct to the page.
Supplied by
Date of Purchase
Installed by
Installer No (if applicable)
Date of Install
Owners full name
Address of Premises
Telephone number
Make
Model
Serial
Commissioning
By pass valve fitted?
Temp e r a t ur e d i ff e r en c e
Notes
Warranty Period
IMPORTANT NOTE For repair of equipment under this Warranty it is recommended that the owner contact
their Madimack Dealer / Installer. If the owner requests Madimack to perform or arrange the service call, the
owner will be liable for all associated costs if the problem is not covered by the provisions of this Warranty or
the Owner’s Statutory Rights. For warranty claims please see Madimack.com.au and check the technical
and service section including the FAQ provided if problems are still present please fill out the online form
for attention and one of our service representatives will be in touch.
Pool Heat Pump
Warranty
Series
Parts
Labour
Titanium Exchanger
EM 60/110
2
1
5 Years