MAFI Trac T230 - Page 44

OPERATION
STEERING WHEEL
42 Operating manual T225 / T230
High beam/Low beam
Fig. 22: Function indicator for high beam/low beam
1 High beam
2 Low beam
X
Switch on the headlights (see “Headlight” on page 50).
When the headlights are switched on, the low beam is
activated.
3 The function indicator in the combination display
instrument lights up 2 (green).
WARNING!
Accident hazard!
Accidents may occur when oncoming traffic is blinded
by the glare of a high-beam headlight.
X Always use low (dipped) beams when there is
oncoming traffic.
X Press the combination switch away from the steering wheel
in the direction of arrow 4.
3 The high beam is switched on. The function indicator in
the combination display instrument lights up 1 (blue).
X Pull the combination switch back to the middle position of
the combination switch.
3 The low beam is switched on.
X Pull the combination switch towards the steering wheel in
the direction of arrow 6.
3 The flash is activated.
3 The combination switch jumps automatically back to the
centre position.
0
0000000
°F
250
105
175
km/h
MPH
120
80
°C
1
1/2
km
0
10
20
30
40
50
60
40
0
10
20
30
11-C26-067-029A-2