6. Z Control
6.1. Overview
Z control is a dedicated software suite designed to unleash the full potential of Z series speakers. Used
in conjuction with Bluetooth control interface available in powered speakers, Z control is an easy tool to
set up and monitor performance of your Z series installation.
Main screen allows for fast detection of near-by Z series units, remote volume adjustment, preset
switching, and level monitoring. Basic information, including processor temperature and actual mains
voltage is also available.
Software suite controls built-in user 4-band parametric equalizer to adjust to the properties of the
venue, and to add personal touch to the sound picture. Options include peaking, low-shelf and high-shelf
filters with adjustable bandwidth and up to ±15 dB of gain, and polarity switch.
Additionaly, Z control incorporates several utilitary functions: Automatic OFF switch to assist in power
saving, cooling fan mode switching to reduce background noise when no signal is available, and Noise
function to help with locating Z series units.
Z control incorporates the tool with firmware update, helping users to keep their systems current as
new functions and improvements are constantly added.
Z control is a free suite available for download from MAG Audio website.
6.2. Speakers discovery
In order to get started with using Z Control with Z series speakers, speakers must be paired with
computer as per paragraphs 5.4.1 and 5.4.2. After successfully paired, launch Z Control suite and press
“Disc“ button to discover Z series speakers in the vicinity.
To Next Page
Loading...
General