Magellan eXplorist 100 User Manual

Marking a Position using the Plotter Cursor
This gives you a way of marking a position, other than your present position, by moving the
cursor around the plotter to a place where you want to create a POI.
1. While viewing the
Plotter screen, use the Arrow joystick to put the eXplorist into
Cursor mode.
2. Continue moving the crosshair cursor until you are over the location where you want
to add a POI.
3. Press MARK.
4. [Optional] Use the Arrow joystick to highlight fields (icon, name, etc.) of the POI
that you want to edit. When you are done editing the field, press ENTER.
5. With Save highlighted, press ENTER.
6. Press ESC to exit the Cursor mode and return to the Position mode.
Points of Interest
27

Magellan eXplorist 100 Specifications

General

Brand	Magellan
Model	eXplorist 100
Category	GPS
Language	English