Track Logs
47
Saving an Active Track Log
This will save your active track log with a name you enter that you can use at some time in
the future. This does not erase your presently active route; only saves the current active
track and adds it to the list of available track logs. Up to three track logs can be saved, each
with a name no more than seven characters long.
1. Press MENU.
2. Use the Arrow joystick to highlight Track Log.
3. Press ENTER.
4. Use the Arrow joystick to highlight Active Track.
5. Press MENU.
6. Highlight Save.
7. Press ENTER.
8. If there are not enough track points to save, an alert will be displayed, informing
you of the same and canceling the save.
9. Use the Arrow joystick and ENTER button to assign a name for the track log. Track
log names can be up to seven characters in length.
10. Use the Arrow joystick to highlight OK when the name has been entered.
11. Press ENTER.
To Next Page
Loading...
Need help?
General