Points of Interest
31
Viewing a POI on the Plotter Screen
POIs that you have saved can be viewed on the
Plotter
screen to assist you in locating the
POI.
1. Press MENU.
2. Use the Arrow joystick to highlight My Pts of Interest.
3. Press ENTER.
4. Use the Arrow joystick to select Nearest or Alphabetical.
5. Press ENTER.
6. Use the Arrow joystick to highlight the POI to be viewed.
7. Press ENTER.
8. Use the Arrow joystick to highlight View on Plotter.
9. Press ENTER.
10. The
Plotter
screen will be displayed in the Cursor mode. The cursor will be directly
over the POI you have selected. You may use the Zoom buttons to change the scale
of the plotter displayed; and if your position icon is within range, it will be shown.
11. Press ESC to return to the list of POIs found in step 7.
Note: Remember that pressing the NAV button will return you to the last viewed
Plotter
screen. In step 11 if you are finished with the POIs in the POI database, you could
press NAV to close the POI database and return to the last viewed
Plotter
screen.
To Next Page
Loading...
Need help?
General