Points of Interest
42
POI’s that have been preloaded as part of the background map can be viewed on the Map screen to assist you
in locating the POI.
1. Press MENU.
2. Use the Arrow joystick to highlight Pts of Interest.
3. Press ENTER.
4. Use the Arrow joystick up/down to highlight Background Map.
5. Use the Arrow joystick left/right to select Nearest or Alphabetical.
6. Press ENTER.
7. [Only if Alphabetical selected] Use the Arrow joystick and the ENTER button to enter the first few
characters of the POI you are searching for. Highlight OK and press ENTER to continue.
8. Use the Arrow joystick to highlight the POI to be viewed.
9. Press ENTER.
10. Use the Arrow joystick to highlight View.
11. Press ENTER.
12. The Map screen will be displayed in the Cursor mode. The cursor will be directly over the POI you have
selected. You may use the Zoom buttons to change the scale of the map displayed and if your position
icon is within range, it will be shown.
13. Press ESC to return to the detail screen of POI’s found in step 8.
Note: Remember that pressing the NAV button will return you to the last viewed Map screen. In step 13 if you
are finished with the POI’s in the POI database, you could press NAV to close the POI database and return to
the last viewed Map screen.
Viewing a Preloaded POI on the Map Screen
To Next Page
Loading...
Need help?
General