Track Logs
59
It has been mentioned before that you can convert saved track logs to a route and view saved track logs on the
map. There are three functions unique to saved track logs that you can perform: following, reversing, and
deleting the track.
This function provides you with a means to use a saved track as a multi-leg route. Once this function has been
activated, the eXplorist will navigate you along your saved track.
1. Press MENU.
2. Use the Arrow joystick to highlight
Track Log.
3. Press ENTER.
4. Use the Arrow joystick to highlight any track log you have previously saved.
5. Press ENTER.
6. Highlight Follow Track.
7. Press ENTER.
8. {Track logging will be turned off alert status.] Press ENTER.
The last viewed navigation screen is displayed with the track log selected being used as an active route.
Reversing a saved track log is identical to following a saved track log, with the exception that the route created
is reversed from the original track log.
1. Press MENU.
2. Use the Arrow joystick to highlight Track Log.
3. Press ENTER.
4. Use the Arrow joystick to highlight any track log you have previously saved.
5. Press ENTER.
6. Highlight Reverse Track.
7. Press ENTER.
8. {Track logging will be turned off alert.] Press ENTER.
The last viewed navigation screen is displayed with the reversed track log selected being used as an
active route.
Working with Saved Track Logs
Following Saved Track Logs
Reversing a Saved Track Log
To Next Page
Loading...
Need help?
General