Preferences
84
As has been mentioned before, the display backlight makes the display easier to read in low light situations
but it also is the largest drain on the batteries. The
1. Press MENU.
2. Use the Arrow joystick to highlight Preferences.
3. Press ENTER.
4. Use the Arrow joystick to highlight Pwr Management.
5. Press ENTER.
6. Use the Arrow joystick to highlight the data field for Light Timer.
7. Press ENTER.
8. Use the Arrow joystick to highlight the desired time interval or set to Timer Off.
9. Press ENTER.
This function provides a way to input information about yourself that could be used to return your eXplorist
should you happen to lose it. Also the name you enter in the Name field will be displayed on the About screen.
Steps to Personalize your eXplorist
1. Press MENU.
2. Use the Arrow joystick to highlight Preferences.
3. Press ENTER.
4. Use the Arrow joystick to highlight Personalize.
5. Press ENTER.
6. Use the Arrow joystick to highlight the data field for Name.
7. Press ENTER.
8. Use the Arrow joystick and ENTER button to input your name.
9. Use the Arrow joystick to highlight OK when the name is entered.
10. Press ENTER.
11. Optional: Use the Arrow joystick to highlight the data field for Address.
Repeat steps 7 through 10 for your address.
12. Optional
: Use the Arrow joystick to highlight the data field for City, State,
Zip. Repeat steps 7 through 10 for your city, state and zip code.
13. Optional: Use the Arrow joystick to highlight the data field for Telephone #. Repeat steps 7 through
10 for your telephone number.
14. Press ESC to exit the Personalize function.
Setting the Light Timer
Personalizing the eXplorist
To Next Page
Loading...
Need help?
General