Preferences
79
Restarting the GPS:
1. Press MENU.
2. Use the Arrow joystick to highlight Preferences.
3. Press ENTER.
4. Use the Arrow joystick to highlight Restart GPS.
5. Press ENTER.
6. Region. Use the Arrow joystick to highlight the region of the world for your
present location.
You can also enter the coordinates for your present position if you know
them by highlighting Enter Coord. This is rarely used and is not described
in this manual.
7. Press ENTER.
8. Area. Use the Arrow joystick to highlight the area of your location. The
list of areas is different for each region selected in step 6.
9. Press ENTER.
10. Ti me. Use the Arrow joystick to enter the current time. Push the Arrow
joystick up or down to change the value and left or right to move the
cursor.
Note: Time is one of the first pieces of information transmitted by the satellites
and even without enough satellite information to compute a position fix, the time
displayed may have already been corrected.
11. Press ENTER.
12. Date. Use the Arrow joystick to enter the present date. Push the Arrow
joystick up or down to change the value and left or right to move the
cursor.
Note: Date is also sent by the satellites and may already be correct as well.
13. Press ENTER.
14. Use the Arrow joystick to highlight Done.
15. Press ENTER.
16. The last viewed navigation screen is displayed and the eXplorist will begin
tracking satellites.
To Next Page
Loading...
Need help?
General