OPERATION AND MAINTENANCE MANUAL
THREE PHASE MCRII SERIES BATTERY CHARGER
Rev: 1.6 03/08/2010 Doc: MAN-3P_MCRII_REV1.6.Doc Page 4 of 29
Magellan Powertronics
68 Cocos Drive, Bibra Lake, WA 6136 Tel: 08 94346621 Fax: 08 94346623
SAFETY PRECAUTIONS
DANGER!
• This equipment contains high DC and AC voltages. Do not
work on live equipment unless authorised
• Isolate AC and DC before working on the equipment. Battery
voltage may be present even when mains is Isolated.
• Give internal capacitors time to discharge (1 minute) before
working on the equipment
• To completely isolate the equipment switch off all Circuit
Breakers and Fuses and allow the internal capacitors to
discharge.
• Batteries on charger especially Boost charge generate
Hydrogen which has the potential to ignite. Ensure that there
is adequate ventilation available for the Hydrogen to escape
To Next Page
Loading...