Turning the Meridian On
After accepting the warning information, the last navigation screen you were
viewing will be displayed. If the last navigation screen view was the Map
screen, the last zoom scale setting will be used.
Turning the Meridian Off
Turning the Backlight On/Off
The display backlight can be set one of three levels (low, high or off).
The backlight causes severe drain on the batteries in the Meridian. To
prevent accidentally turning the backlight on and leaving it on, the Meridian
will turn the backlight off when there have been no buttons pressed for 4
minutes. Pressing any button will turn the backlight back on in this instance.
You can change the time delay for the backlight in Setup.
Adjusting the Contrast
To Next Page
Loading...
