Magic Chef CLY1612BDH - Page 5

USING THE COOKT()P
The surface burnerswillfeatureeither matchlit ignitionor To light surfaceburnerwith Piezo ignition:
Piezo pilotlessignition.Be sureall controlknobsareinthe 1. Place a panontheburner grate.
OFFpositionbeforesupplyinggastotheappliance.Besure
gassupplytoapplianceis onbeforelightingburner. 2. Pushinandturnthesurfaceburner __/_
controlknobtotheLITEposition.
IMPORTANT:Only light one
Iftheappliancehasnotbeenoperatedfora periodoftime, surfaceburnerat a time.
thesurfaceburnermaybedifficulttolightduetoairinthegas
line.Tobleedoff airfromtheline,holda lightedmatchnextto 3. Immediately,rotatethe TopBurner
the burner and turn the surface burner control knobto the Ignitorknobto the right (clockwise)
ON position.When the burnerlights,turn the knob back to severalclicksuntiltheburnerlights.
the OFFpositionand proceedas directedbelow. The burner should light within 6
clicks or one full rotation of the
Topreventdamageto thecooktopor pan,neveroperatethe knob.
surface burnerwithouta pan in place,never allowa panto
boil dry, and never operate a surface burner on HIGH for 4. When the burner lights, adjust the surface burner
extendedperiodsoftime. controlknobbetweenOFFand HIto select thedesired
flamesize.
CAUTION: If the burner does not light within about 4
5. After cooking,turnthe surfaceburnercontrol knobtothe
secondsorfftheflameshouldgooutduringcooking,turn OFFposition.
the burner off. Ifgas hasaccumulatedanda stronggas
odorisdetected,open a windowandwait 5 minutesfor To operate burnerif the Piezo ignitor is not functionah
thegas odorto disappearbeforerelightingthe burner. 1. Be sureall controlsare inthe OFF position.
2. Holda lightedmatchto the desiredsurfaceburner head.
To lightsurface burnerwith matchlit Ignition:
1. Placea panonthe burnergrate. CAUTION:Donotturnthecontrolknobonandallowgas
to escapebeforelightingthe match.
2. Holda lighted match next to the desired surface burner
head. 3. Push in and turn the surface burnercontrol knob to the
LITEposition.
CAUTION:Donotturn thecontrolknobon andallowgas 4.Whenthe burnerlights,adjusttheknobbetweenOFFand
to escapebefore lightingthe match. HI toselect the desiredflamesize.
3. Push in and turn the surface _ 5. After cooking,turn the knobto the OFF position.
burner control knob to the LITE
position.
4. When the burner lights, adjust Whenthe recreationalvehicle isnot inuseorwhiletraveling,
the knobbetweenOFF andHI to
select the desiredflame size. turn all knobsto the OFF positionand turn off the main gas
supply.
5. Aftercooking,turnthe surface burnercontrolknobtothe
OFF position.