Magic Chef MCFR17TTB

Questions and Answers:

A
Amber RileyJul 26, 2025
How to light Magic Chef MCFR17TTB Oven surface burners?
- T
  Timothy LeonardJul 26, 2025
  To light the surface burners on your Magic Chef Oven, push in and turn the Surface Control knob to the LITE position until the burner ignites, then adjust to your desired flame size. Also, check that the gas supply valve is open. If it still doesn't light, with the burner off, use a small-gauge wire or needle to clean any blocked ports or slots. You may also need to unscrew the igniter cap and replace the AAA battery.
S
shannon27Aug 5, 2025
What to do if Magic Chef Oven surface burner flame burns halfway around?
- M
  Michael YoungAug 5, 2025
  If the surface burner flame on your Magic Chef Oven only burns halfway around, it could be due to moisture on the burner. Try drying the burner thoroughly. Additionally, with the burner off, clean the ports with a small gauge wire or needle to remove any blockages. If moisture remains after cleaning, lightly fan the flame and allow the burner to operate until the flame is full. Ensure the burners are completely dry.
D
Dr. Angela WoodAug 15, 2025
Why is the Magic Chef MCFR17TTB surface burner flame orange?
- M
  Mrs. Amanda JosephAug 15, 2025
  An orange flame on your Magic Chef Oven's surface burner could be due to dust particles in the main gas line. Allow the burner to operate for a few minutes; the flame should turn blue as the dust clears. Also, if you are in a coastal area, a slightly orange flame might be unavoidable because of salt air.