Magic Chef MCFR21STS

Questions and Answers:

K
karendavisJul 25, 2025
How to light Magic Chef Oven surface burners?
- H
  Heidi WhiteJul 25, 2025
  To light the surface burners on your Magic Chef Oven, push in and turn the Surface Control knob to the LITE position until the burner ignites, then adjust to your desired flame size. Also, check that the gas supply valve is open. If it still doesn't light, with the burner off, use a small-gauge wire or needle to clean any blocked ports or slots. You may also need to unscrew the igniter cap and replace the AAA battery.
D
Donna ShawAug 5, 2025
What to do if Magic Chef MCFR21STS surface burner flame burns halfway around?
- P
  Philip BuchananAug 5, 2025
  If the surface burner flame on your Magic Chef Oven only burns halfway around, it could be due to moisture on the burner. Try drying the burner thoroughly. Additionally, with the burner off, clean the ports with a small gauge wire or needle to remove any blockages. If moisture remains after cleaning, lightly fan the flame and allow the burner to operate until the flame is full. Ensure the burners are completely dry.
I
iellisAug 15, 2025
Why is the Magic Chef MCFR21STS Oven surface burner flame orange?
- L
  Leah BrownAug 15, 2025
  An orange flame on your Magic Chef Oven's surface burner could be due to dust particles in the main gas line. Allow the burner to operate for a few minutes; the flame should turn blue as the dust clears. Also, if you are in a coastal area, a slightly orange flame might be unavoidable because of salt air.

Magic Chef MCFR21STS Specifications

General

Fuel Type	Electric
Oven Capacity	2.1 cu. ft.
Number of Burners	4
Color	Stainless Steel
Number of Oven Racks	2
Oven Cooking Modes	Bake, Broil
Power Source	Electric
Voltage	240V
Type	Freestanding
Oven Features	Broiler, Self-Cleaning
Control Type	Knob
Width	24 in
Height	36 in