Need help?Do you have a question about the Magicar M902F and is the answer not in the manual?
General| Alarm Type | Two-Way |
|---|---|
| Type | Car Alarm System |
| Operating Frequency | 433.92 MHz |
| Operating Voltage | 12V DC |
| LCD Remote | Yes |
| Door Trigger | Yes |
| Engine Immobilizer | Yes |
| Remote Start | Yes |
| Central Locking | Yes |
| Anti-Hijack | Yes |
| Valet Mode | Yes |
| Battery Backup | No |
| Compatibility | Universal |
| Operating Temperature | -40°C to +85°C |
| Remote Battery | AAA |
| Shock Sensor | Yes |
Identifies the brand and system type for the Magicar M902F.
States the company responsible for manufacturing the product.
Safety requirement for manual cars to prevent unintended starting.
Critical safety feature ensuring the vehicle only starts in Park or Neutral.
Covers warranty terms and disclaims liability for misuse or damage.
Defines the intended use of the product and prohibits other applications.
Details the physical components of the remote control unit.
Defines the meaning of various icons displayed on the remote's LCD screen.
Provides further explanations and definitions for LCD icons.
Explains how to use the remote buttons and their combinations for functions.
Instructions for setting time and controlling RPS/Vibrator features.
Steps to lock and unlock the vehicle using the remote.
Guidance on how to enable and use the automatic arming feature.
Guide for remotely starting the vehicle's engine.
Safety procedure for manual transmission vehicles to prevent unintended start.
Steps required to cancel the reservation mode.
Lists error codes and their meanings for auto-start issues.
How to release the trunk and query the vehicle's status.
Instructions for using panic mode and disabling siren chirps.
Using valet mode and the automatic ignition lock feature.
Details shock sensor functionality, impact levels, and alerts.
Explanation of passive and active arming modes.
How to set timer reservations and use turbo mode.
Features of the optional voice module for recording and playback.
Details on using auxiliary outputs for accessories like sunroofs.
Notifications for theft, shock sensing, and RPS events.
Information on the RPS system and programming keyless entry.
Detailed step-by-step guide for programming keyless entry.
Alerts for theft, low car battery, and starter-kill function activation.
How the system indicates door openings via signal lights.
Specific instructions for operating propane-powered vehicles.
Steps to program additional or replacement remote controls.
Instructions on how to adjust the sensitivity of the shock sensor.
How to adjust the volume of the siren and RPS sensor.
To Next Page
