Magicar M870AS - User Manual

MAGICAR M870AS
EN
Car alarm with two-way remote and remote - start system
Installation guide

Summary

IV. WIRING ARRANGEMENT

CONNECTOR 1 - CN1 Wiring

Details wiring connections for Connector 1 on the main unit.

CONNECTOR 2 - CN2 Wiring

Details wiring connections for Connector 2 on the main unit.

CONNECTOR 3 - CN3 Wiring

CONNECTOR 4 - CN4 Wiring

CONNECTOR 5 - Red Wiring

CONNECTOR 6-12 Wiring

VII. Programming of Optional Functions

Programming Menu No. 1

Programming Menu No.2

VIII. CALIBRATION OF THE FUNCTION - HAZARD LIGHT MODE

Calibration Procedure

IX. VALET MODE

X. REMOTE CONTROLS PROGRAMMING

Remote Control Programming

Steps to pair new remote controls with the alarm system.

Security Code Setup

Guide for setting up the initial 4-digit security code.

Changing PIN Code

Magicar M870AS Specifications

General

Operating Frequency	433.92 MHz
LCD Display	Yes
Remote Control	Yes
Remote Engine Start	Yes
Tilt Sensor	Yes
Anti-hijack	Yes
Door Trigger	Yes
Engine Immobilizer	Yes
Keyless Entry	Yes
Panic Mode	Yes
Valet Mode	Yes
Alarm Type	2-Way
Type	Car alarm
Shock Sensor	Yes
Compatibility	Universal