Need help?Do you have a question about the Magicar M100AS and is the answer not in the manual?
General| LCD Remote | Yes |
|---|---|
| Remote Start | Yes |
| Pager Function | Yes |
| Anti-Hijack | Yes |
| Valet Mode | Yes |
| Engine Immobilizer | Yes |
| Keyless Entry | Yes |
| System Type | Two-Way |
| Shock Sensor | Yes |
Visual layout of the front of the remote.
Visual layout of the back of the remote.
Explanation of icons displayed on the remote screen.
How to lock, arm, unlock, and disarm the vehicle with the remote.
Vehicle response to door opening or impact when armed.
Procedures for unlocking, disarming, and auto re-arming the system.
How the remote displays RPS or shock sensor alerts.
Explains automatic locking/unlocking based on proximity.
How to use auxiliary outputs (AUX 1, AUX 2) for added features.
How to start and stop the vehicle remotely.
Procedure to extend the remote start runtime.
How to open the vehicle's trunk using the remote.
How to check vehicle status like temperature and battery voltage.
How to activate and cancel panic mode for emergencies.
How to mute or unmute the vehicle's siren chirps.
How to enable/disable Valet mode to disable functions.
How to turn the shock sensor on or off to prevent false alarms.
Automatic door locking based on ignition status.
How to enable/disable automatic arming after disarming.
How to set and activate automatic start at a scheduled time.
How to monitor driving or parking time.
How to use the turbo timer to keep the engine running.
How to locate your vehicle in crowded areas.
How to turn on the EL lamp for screen visibility.
How to prevent accidental button presses on the remote.
Alerts for potential vehicle battery drain.
Explains trunk open sensor and wakeup interception options.
What happens when the shock sensor is triggered.
Vehicle response to door, trunk, or hood opening when armed.
How the remote is alerted when someone knocks on the RPS sensor.
How signal strength is displayed on the remote.
How the remote operates with low battery.
Details on reduced functionality in battery save mode.
How time information is saved and restored.
Setup for burning off gas residue in LPG systems.
How remote start aids in burning off gas residue.
Preventing starting in gear for manual transmission.
How passive reservation works for manual vehicles.
How reservation mode is cancelled in manual transmission vehicles.
Error codes indicating remote wakeup problems.
How to adjust the siren volume by cutting a wire.
Steps to enter Valet mode without the remote.
Accessing and navigating the remote programming menu.
How to exit the remote programming menu.
Accessing and configuring main system options.
How to enter the programming menu.
Navigating through menu options using buttons.
How to change the setting for a selected option.
How to save changes to the vehicle.
How to exit programming without saving changes.
What happens if option setup fails.
To Next Page
