To Next PageTo Next Page
Need help?Do you have a question about the Magicar m110as bruger and is the answer not in the manual?
Describes the remote's physical components and layout.
Lists technical details like frequency, dimensions, and operating temperature.
Details the layout and elements of the remote's LCD screen.
Explains the meaning of various icons displayed on the LCD screen.
Explains the button layout and general function mapping.
Details how to lock the vehicle and arm the alarm system.
Explains the process to unlock the vehicle and disarm the alarm system.
Describes the auto mode for proximity-based locking and unlocking.
Explains how to use auxiliary outputs for various functions like windows or lights.
Details the procedure for starting the vehicle remotely.
How to open the vehicle's trunk using the remote.
How to check the vehicle's status (armed, remote start, etc.) via the remote.
Explains how to activate the panic alarm for emergencies.
How to mute or unmute the alarm's chirp sound.
How to activate/deactivate Valet mode to disable most functions.
How to turn the shock sensor on or off to prevent false alarms.
Explains the automatic door locking feature when the ignition is active.
How to enable automatic arming after disarming.
How to set the vehicle to start automatically at a future time.
How to use the timer to monitor parking or driving duration.
Explains the turbo timer function for vehicles with turbochargers.
How to turn on the remote's backlight for visibility.
How to prevent accidental button presses on the remote.
Alerts about vehicle battery drain and related indicators.
Explains the function of the trunk open sensor for alarm triggering.
Prevents starting if the vehicle is forced open.
Monitors wait-to-start lights for diesel preheating.
Explains the sequence of events when the shock sensor is triggered.
Details alarm triggering when doors, trunk, or hood are opened.
How the remote is paged when the vehicle's RPS sensor is activated.
How the engine starts automatically based on temperature settings.
Detects presence inside the car and alerts the remote.
How to unlock doors using a password via the RPS sensor.
How signal strength is displayed on the remote when in range.
How the remote operates in low battery mode to conserve power.
Saves time settings during battery replacement.
Flashing parking lights indicate an open door.
Setup for vehicles with GAS/LPG systems, including burning off residue.
How to reserve remote start for manual transmission vehicles safely.
Explains error codes indicated by parking lights for remote start failures.
How to adjust the sensitivity of the shock sensor.
How to enter Valet mode without the remote.
Details how to program various remote functions and settings.
General
