Magicar M902F - User Adjustable Settings and Customization; Shock Sensor Sensitivity Adjustment; Siren and RPS Sensor Volume Control

25
▶1 Adjusting the sensitivity of the shock sensor
It is advised that you may want to know where the shock sensor is located so
that you can adjust the sensitivity of the volume depending on your need.
Warning:
Please be careful not to turn the volume beyond its limit.
The volume can be damaged.
▶2 Adjusting the volume of the siren
The volume of the siren can be reduced by cutting off the jump wire attached
to the siren.
▶3 Adjusting the volume of the R.P.S Sensor
Adjustable by Magicar Users