Magicard Enduro - Page 10

6
A
A
B
C
ENG
Open printer.
A Pull out the unused cleaning roller.
B Peel off white protective layer carefully
to reveal tacky surface.
C Place cleaning roller back into printer.
NB. Please now refere to section 15 for all future
cleaning roller changes.
FR
Open printer.
A Pull out the unused cleaning roller.
B Peel off white protective layer carefully
to reveal tacky surface.
C Place cleaning roller back into printer.
NB. Please now refere to section 15 for all future
cleaning roller changes.
ES
Open printer.
A Pull out the unused cleaning roller.
B Peel off white protective layer carefully
to reveal tacky surface.
C Place cleaning roller back into printer.
NB. Please now refere to section 15 for all future
cleaning roller changes.
PT
Open printer.
A Pull out the unused cleaning roller.
B Peel off white protective layer carefully
to reveal tacky surface.
C Place cleaning roller back into printer.
NB. Please now refere to section 15 for all future
cleaning roller changes.
IT
Open printer.
A Pull out the unused cleaning roller.
B Peel off white protective layer carefully
to reveal tacky surface.
C Place cleaning roller back into printer.
NB. Please now refere to section 15 for all future
cleaning roller changes.
DE
Open printer.
A Pull out the unused cleaning roller.
B Peel off white protective layer carefully
to reveal tacky surface.
C Place cleaning roller back into printer.
NB. Please now refere to section 15 for all future
cleaning roller changes.
CN
Open printer.
A Pull out the unused cleaning roller.
B Peel off white protective layer carefully
to reveal tacky surface.
C Place cleaning roller back into printer.
NB. Please now refere to section 15 for all future
cleaning roller changes.
RU
Open printer.
A Pull out the unused cleaning roller.
B Peel off white protective layer carefully
to reveal tacky surface.
C Place cleaning roller back into printer.
NB. Please now refere to section 15 for all future
cleaning roller changes.
PL
Open printer.
A Pull out the unused cleaning roller.
B Peel off white protective layer carefully
to reveal tacky surface.
C Place cleaning roller back into printer.
NB. Please now refere to section 15 for all future
cleaning roller changes.
NL
Open printer.
A Pull out the unused cleaning roller.
B Peel off white protective layer carefully
to reveal tacky surface.
C Place cleaning roller back into printer.
NB. Please now refere to section 15 for all future
cleaning roller changes.
Enduro QSG multi language V3 - 07:Enduro QSG multi language V2- 07 29/1/08 14:10 Page 19