Need help?Do you have a question about the Magicard Ultima and is the answer not in the manual?
Crucial step to install drivers before connecting the USB cable.
Connects the USB cable after driver installation and restarts the computer.
Guides users on how to open and navigate the printer driver settings window.
Identifies and labels the key physical parts of the ID card printer.
Describes the functions and layout of the printer's touch-sensitive LCD display.
Explains the main screen interface, icons, and status indicators of the printer.
Details the options available within the Tools Menu, such as sample card printing.
Step-by-step guide to manually setting the printer's IP address.
Explains the dual interface reader board for both contact and contactless cards.
Highlights why regular maintenance is crucial for printer longevity and print quality.
Details how to use the cleaning kit, including adhesive cards and roller wipes.
Step-by-step guide on how to replace the printer's cleaning roller.
Instructions for cleaning the print head using a specialized cleaning swab.
Guide on how to use a cleaning card to clean the printer.
Card jam detected; suggests opening the door for more options.
Card jam related to the flipper mechanism.
Mag head took too long to clear the home opto sensor.
Mag head took too long to unblock the head home opto sensor.
Printer failed to verify encoded data on mag card.
Cleaning card not detected by sensor within expected time.
Detected card is shorter than expected, likely not a proper cleaning card.
Cleaning card jam detected, possibly due to obstruction or slipping.
Cleaning card jam detected; card not ejected from rear.
Heated roller temperature exceeded maximum permitted level.
Printhead temperature exceeded maximum permitted level.
Heater temperature sensor is disconnected or reporting unusually low temp.
Printhead temperature sensor is disconnected or reporting unusually low temp.
To Next Page
General