Need help?Do you have a question about the Magicard Rio and is the answer not in the manual?
Describes the YMCKO five-panel film for full-colour prints with black text/barcodes.
Details the monochrome resin black film for prints without overcoat.
Covers monochrome resin black film with protective overcoat for 600 images.
Explains the YMCKOK six-panel film for rear-side printing on Tango models.
Specifies the required dimensions for Magicard printer cards.
Details the acceptable thickness range for printer cards.
Lists conditions for cards to ensure optimal print quality.
Describes the usable printing area on the card and recommendations for full bleed.
Step-by-step guide for cleaning the printer using the black button.
Instructions for performing a test print to check printer functionality.
Details how to access driver properties via Windows Start > Settings > Printers.
Explains accessing driver properties through the File > Print > Properties menu.
Covers printer name, comments, and test page options.
Configures printer ports, drivers, timeouts, and spooling settings.
Manages color profiles to ensure accurate color reproduction.
Allows printer sharing for network users (not available in Win 95).
Selects printer model and configures print options like duplex and hand feed.
Accesses settings for magnetic encoding configuration.
Configures color format options for different print sides.
Configures image size and orientation for printing on cards.
Adjusts color settings like gamma curve and RGB values.
Configures paper size and copy count for print jobs.
Includes flip settings, printing options for front/back, and orientation.
Manages gamma correction, color matching, RGB adjustment, and printhead power.
Guides magnetic encoding setup in NT/2000/XP via Device Settings.
Guides magnetic encoding setup in 95/98/ME via Printer tab.
Configures macro processing, start/end characters for magnetic data.
Manual selection of coercivity, position, verification, and track settings.
Introduces the five windows of the support tools suite.
Selects printer port and refreshes data to synchronize with the printer.
Adjusts printer setup parameters like image position and print density.
Provides statistical usage information about the printer.
Displays printer component serial numbers and firmware version.
Allows the printer firmware to be upgraded with new issues.
Details commands for ISO standard magnetic encoding in image file headers.
General| Print Resolution | 300dpi |
|---|---|
| Interface | USB |
| Print Technology | Dye Sublimation |
| Print Capability | Full colour and monochrome single-sided printing |
| Card Capacity | 100 cards |
| Connectivity | USB |
| Operating Systems Supported | Windows 7, 8, 10 |
| Card Dimensions | 85.6mm x 54mm |
| Power Supply | 100-240V |
To Next Page