To Next PageTo Next PageWhat to do if fumes enter the room when Magiglo DUO is in operation?
If fumes are entering the room when your Magiglo Indoor Fireplace is in operation, it could be due to: * A blocked flue. In this case you should remove the blockage in the flue. * Insufficient replacement air. Ensure air vents are free of obstructions.
Why does the pilot light of my Magiglo DUO go out when the control is released?
If the pilot light on your Magiglo Indoor Fireplace lights but goes out when the control is released, it could be due to: * A loose thermocouple connection at the control valve end. Remake the thermocouple connection, ensuring it is firm. * A faulty thermocouple. In this case replace the complete pilot assembly.
What to do if the piezo operates normally but the pilot will not light on my Magiglo DUO?
If the piezo on your Magiglo Indoor Fireplace operates normally but the pilot will not light, it may be due to: * No gas supply. Check the isolation valve and gas supply. * A blocked pilot jet. If this is the case, replace the pilot assembly.
General| Brand | Magiglo |
|---|---|
| Model | DUO |
| Category | Indoor Fireplace |
| Language | English |
Details the function and importance of the Oxygen Depletion Sensing pilot system.
Specifies the required dimensions for fire fret and ash pan cover for installation.
Step-by-step guides for lighting the fire with various control systems and manual operation.
Instructions for replacing batteries in handset, receiver, and battery packs for different control models.
Guidance on arranging imitation fuels and fitting decorative trims or fascia.
Instructions for cleaning components, and advice on home improvements affecting the fire.
General safety precautions and specific requirements for flues and chimneys for safe installation.
Details on dimensions, ventilation, technical data, and choosing the correct appliance location.
Checklist of parts, step-by-step installation guides, and final commissioning steps.
Guidelines for qualified installers, safety checks, and routine servicing tasks.
Procedures for replacing specific parts like pilot assembly, injectors, valves, motors, and receiver.
A guide to diagnosing and resolving common installation and operational problems.
