Place the egg whisk directly in the main
bowl on the motor shaft.
Put the lid on, lock it into position and
remove the pusher.
EGG WHISK: make sure to assemble the
4 parts correctly.
Check that the metal shaft is correctly
locked.
The small main blade also fits onto the
support and locks into place when rotated
in a slight anti-clockwise direction.
Place the mini blade on the motor shaft
in the mini bowl.
USING THE CITRUS PRESSFITTING THE ACCESSORIES
MINI BOWL: fit over the central spindle
inside the large bowl.
1
3
2
3
Fit the citrus press basket onto the bowl
and turn anticlockwise until it locks into
position.
Select the cone according to the size of
your citrus fruit. The large cone should
always be slotted onto the small one.
Slide the cone onto the motor shaft.
Position the lever arm opposite the
locking system and clip the tab to the
base of the basket.
Position the halved fruit on the cone,
pressing down gently.
Excess pressure is unnecessary and may
cause damage
Lower the lever arm, switch your pro-
cessor on, and apply gentle pressure
to the arm until all the juice has been
extracted.
Switch your appliance off before rai-
sing the lever arm, to avoid splashing.
Place the lid on top of the bowl with the
feed tube on the left hand side of the
handle and turn anti-clockwise until it
locks into place.
4
When juicing grapefruit, release the pressure very slightly from time to time, to
extract the maximum amount of juice.
1 2 1 2 3
5 6
7 8
4
Please be careful when handling the blades and disc as they are
extremely sharp.
!
8 9
To Next Page
Loading...
Need help?
General
