Metering
Here, the measuring method for calculating the exposure is determined.
Center: Uses the average light metered from the entire frame, but places a higher emphasis
on objects located in the middle.
Multi*: Exposure is measured in the entire image area.
Spot: A very small area in the centre of the image is measured in order to calculate the
correct value for the exposure.
White Balance
Here, the white balance for the shooting of photos is dened for dierent lighting conditions.
Hereby, the colour scheme perceived by the human eye will be equalized.
Auto*/ Daylight/ Cloudy/ Tungsten/ Fluorescent
ISO
This sets the light sensitivity for recording photos. If the sensitivity is increased (and the ISO
gure is increased), photography will become possible even in dark locations, but the picture will
then appear more grainy (noisy).
Autom.*/ ISO 100/ ISO 200/ ISO 400/ ISO 800
Exposure
With the help of the exposure compensation, the exposure value can be set manually from - 2.0
EV to + 2.0 EV. The higher this value, the brighter pictures will be.
+2.0 / +1.7 / +1.3 / +1.0 / +0.7 / +0.3 / +0.0* / -0.3 / -0.7 / -1.0 / -1.3 / -1.7 / -2.0
To Next Page
Loading...
