26
How do I switch the Recorder between channel 3 and 4?
The factory setting is for channel 3. However, if you would like to
switch to channel 4, proceed as follows:
1 Press CHANNEL q while 'IS TV ON?' is displayed. 'C04' (channel
4) will appear on the display.
2 If you want to switch back to channel 3, press CHANNEL r .
'C03' (channel 3) will appear on the display.
?
6
Switch your TV to the selected channel (channel 3 or 4).
The menu for language selection will appear on the screen.
Initial Setup
Menu Language
English
Español
Français
Press OK to continue
a I don't see a menu for language selection
b Check the cable connections.
b Is 'DVDR' (DVD recorder operation) lit up in the display?
If not, press the TV/DVD button until 'DVDR' is lit.
b Change between channel 3 and 4 on the TV.
Problem
7
This TV channel number must be used in the future for DVD
recorder playback.
Then, read the paragraph 'Initial installation' in the chapter 'Installing your DVD recorder'.
Connecting the DVD recorder
To Next Page
Loading...
Need help?
General
