75
Additional settings
You can select the following functions in this menu:
Features
Access control Enter code...
Status field On
Auto resume On
Low power standby Off
'Access control'
Please read the chapter on Child lock.
'Status field'
Along with the on screen menu, the OSD (On Screen Display) also displays the current
operating status on the TV screen (counter, playback, recording, TV channel,...).
You can switch off the information about the operating status so as to avoid recording this
information when making recordings.
'On': The Status Box appears with every selected mode for a few seconds, then disappears again.
'Off': The Status Boxes will not appear on the TV screen.
Auto resume
If playback of a pre-recorded DVD or VCD is interrupted ( STOP h or OPEN/CLOSE ),
playback will be restarted at the exact location when the disc is reinserted. This function only
applies to the last 20 discs you played.
If desired, this function can be turned off.
Low power standby
To save energy, you can switch off the clock display on the DVD recorder. Programmed
(TIMER) recordings will still take place.
'On': If the DVD Recorder is switched off using STANDBY m , the clock display is also switched
off.
'Off': If the DVD Recorder is switched off using STANDBY m , the clock display is visible.
'PBC'
This line only appears when a VCD has been inserted.
This function is used to activate or deactivate the PBC menu (playback control) of the Video
CDs. For more information, please see the chapter on "Playback", "Playback of a (Super) Video
CD.
ENGLISH
User preferences
To Next Page
Loading...
Need help?
General
