42
FPlayback
General information regarding playback
The DVD recorder can be used with the following systems:
•) DVD Video
•) Video CD or Super Video CD
•) DVD+RW
•) DVD+R
•) DVD-RW (video mode, finalized)
•) DVD-R
•) CD-R
•) CD-RW
•) Audio CD
•) MP3-CD
You can operate the DVD recorder using the remote control or the buttons on the front of the
DVD recorder.
Inserting a disc
OPENING C01
1
Press the OPEN/CLOSE button on the front of the Recorder.
The disc tray will open. 'OPENING' will appear in the display, then
'TRAY OPEN.'
2
Carefully place the disc into the tray with the label facing up, then
press PLAY/PAUSE G9 or OPEN/CLOSE .'CLOSING' then
'READING' will appear on the display. This indicates the disc is
being read.
How do I insert doublesided DVDs?
Double-sided DVDs do not have labels on either side. The label for each
side is placed in the middle (on the inner ring). To play a specific side,
the label on the side you want to play must be on top.
?
Opening/Closing the tray using the remote control
You can also use the remote control to open and close the disc tray.
To do this, hold down the STOP h button on the remote control until
'OPENING' (opens) or 'CLOSING' (closes) appears in the display.
Tip
3
Playback may begin automatically.
A menu may appear during playback of a DVD. If the titles and chapters are numbered, press a
number button on the remote control. You can also select a menu item with D , C , A ,
B and confirm with OK .
Playback
To Next Page
Loading...
Need help?
General
