To Next PageTo Next PageWhy is there no picture or sound on my Magnavox TV DVD Combo?
If your Magnavox TV/DVD combo has no picture or sound, try switching to a different channel as there may be station trouble. Ensure the power is on, and select TV mode by pressing SELECT on the remote. Also, check that the antenna is properly connected to the terminal on the back of the set, and if you're using an outside antenna, inspect it for any broken wires.
What to do if Magnavox TV DVD Combo remote control not working?
If your Magnavox TV/DVD combo isn't responding to the remote, make sure the power plug is connected to the AC outlet. Also, check the remote's batteries, aim directly at the sensor, remove obstacles, and ensure you're within 23 feet. Verify that the correct mode is selected by pressing SELECT on the remote.
General| Brand | Magnavox |
|---|---|
| Model | MSD513E |
| Category | TV DVD Combo |
| Language | English |
Safety warning about laser radiation exposure.
Warning about radio frequency energy generation and potential interference.
Compliance with FCC rules for digital devices and potential interference.
Guidelines for selecting an installation place for safe operation and performance.
List of included accessories and how to obtain replacements.
Precautions to prevent electrical shock and fire hazards.
Explanation of symbols used throughout the manual for clarity.
Diagram and labels for front panel controls.
Diagram and labels for remote control buttons.
Diagram and labels for rear panel connections and ports.
